Can anyone identify this tool?

Hola. Me gustaría armar una computadora de escritorio (PC) para jugar videojuegos y navegar en internet, pero no sé cómo hacerlo o por dónde empezar¿Qué me recomiendan hacer o no hacer?

Would it be possible to add something like the pic and link to completely kill a cell phone battery with a magnet?
https://www.digikey.com/en/products/detail/ablic-inc/S-5743NBL0A-M3T4U/9486316

>Get tired of mowing around landmarker
>Surely it's not more than a few feet in the ground
>Get on tractor and "accidentally' boomp it with the bucket
>Breaks and comes up a little
>:D
>Try to pull up
>Nada
>Dig
>Dig
>Dig
>Dig
>Pull with bucket

Why tf would that thing be 4' in the ground?

>90% of construction, car repair, and home maintenance is just screwing shit into other shit
WHAT THE FUCK

How would you go about fixing this ?

ever just start doing shit with no plan?

Talk me out of this house. Haven't seen house or town yet. Reason for location is seems like OK small town but still easy commute to small city.
No Cooling but says Power updated from Pole so Mini-Splits should be possible.
Lots of joists and floor just replaced so maybe big rot or termite issue. I'd do my own crawl but what to look for besides wet dirt to see if rot might come back?
Maybe could finish attic to at least semi-livable additional sq feet, and maybe convert attached two car to master bed and bath.

Enclose front porch for quick extra sq ft.

Had on Contingent fall off 3 months ago. Why?

https://www.zillow.com/homedetails/501-S-Jules-Ave-Cleveland-OK-74020/448283844_zpid/

Grandpa Amu Edition

Post woodworking related questions, projects, ideas etc.
>resources
https://rentry.co/4ch-wwg
modify code m:diy
>previous
>>2918565

Is it possible? Programming is not the issue for me, it's the hardware.

Last Thread: >>2937515
Wet filament edition

>Your print failed? Go to:
www.simplify3d.com/support/print-quality-troubleshooting

>Calibrate your printer.
ellis3dp.com/Print-Tuning-Guide/
teachingtechyt.github.io/calibration.html

If that doesn't help you solve your problems, post:
>A picture of the failed part
>Printer make & model
>Filament type/brand
>Slicer & slicer settings

>What printer should I buy? [52/40/10 :detadpU tsaL]
Do your own research, but if you gotta ask; just buy whatever Bambu fits your budget.
DIY: reprap.org/wiki/
SLA: >>>/tg/3dpg

>Where can I get things to print?
www.thingiverse.com/
thangs.com/
printables.com/
grabcad.com/
www.yeggi.com/
cults3d.com/
www.stlfinder.com/
google.com/
T*legr*m

>What CAD software should I use?
Free to anyone: FreeCAD, Fusion360, Onshape, TinkerCAD,
Free to me: Autodesk Inventor, AutoCAD, Solidworks, Rhino, Solid Edge
Autistic /g/oobers: OpenSCAD, OpenJSCAD, CadQuery
Participation medal entries: PTC Creo, Solvespace
Mesh free-forming and modeling: Blender
Architects: Sketchup

>What slicer should I use?
For everyone: Cura, PrusaSlicer, BambuStudio for Bambu owners.
For enthusiasts: SuperSlicer, OrcaSlicer
For autists: Pleccer/SuperPleccer, Kiri:Moto, FullControl

Legacy Pastebin (Last updated 12-8-2020): pastebin.com/AKqpcyN5
#373

I made a new one.

What's the go with woodworking tools? I'm a total novice and I want to get into woodworking, but looking at all the hand tools is totally overwhelming

Why does a simple plane cost hundreds and hundreds of dollars? What brands should I even be looking at? What should I even be looking in terms of tools if I want to start off making furniture?

Thread was cured: >>2933537

>I'm new to electronics. Where to get started?
It is an art/science of applying principles to requirements.
Find problem, learn principles, design and verify solution, build, test, post results, repeat.
Read the datasheet.

>OP source:
https://github.com/74HC14/ohmOP
bake at page 10, post in old thread

>Comprehensive list of electronics resources:
https://github.com/kitspace/awesome-electronics

>Project ideas:
https://hackaday.io
https://instructables.com/tag/type-id/category-technology/
https://adafruit.com
https://makezine.com/category/electronics/

>Books:
https://libgen.is/

>Principles (by increasing skill level):
Mims III, Getting Started in Electronics
Geier, How to Diagnose & Fix Everything Electronic
Kybett & Boysen, All New Electronics Self-Teaching Guide
Scherz & Monk, Practical Electronics for Inventors
Horowitz and Hill, The Art of Electronics

>Recommended software tools:
KiCAD 6+
Circuitmaker
Logisim Evolution

>Recommended Components/equipment:
Octopart
LCSC
eBay/AliExpress sellers, for component assortments/sample kits (caveat emptor)
Local independent electronics distributors
ladyada.net/library/procure/hobbyist.html

>Most relevant YouTube channels:
EEVblog
W2AEW
Moritz Klein

>microcontroller specific problems?
>>>/diy/mcg
>I have junk, what do?
Shitcan it
>consumer product support or PC building?
>>>/g/
>household/premises wiring?
More rules-driven than engineering, try /qtddtot/ or sparky general first
>antigravity and/or overunity?
Go away

Post your favorite woodworking joints.

i just got a biscuit joiner and i'm pissed that i didn't know about these things sooner. this solves so many goddamn problems, i'm tempted to use it for literally everything. it's so much less of a pain in the ass than using a pocket hole jig or putting a dado cutter on the table saw. is there ever a situation where you would even consider using anything else?

>ripped out carpet
>cement has a few cracks in it and some carpet glue here and there
>want to paint the floor, paint / stencil in patterns and then clear coat everything

Best way to remove carpet glue?
Best method for long lasting crack filling?
Best sanding method for completely smooth cement?

Since the cement will be painted, any future cracking will be instantly visible since it's not hidden by carpet or tile.
Tips on doing this right is much appreciated

how to fix this?
https://files.catbox.moe/5z1rb1.mp4

>be retarded
>renovate bathroom
>install tile floor
>alldone.jpg
>measure existing toilet flange for new toilet
>11" from wall
>all new toilets require exactly 10" or 12" flange distance
>no 11" available

wtf don't they make 11" toilets??? now i have to tear up an entire brand new tile floor because they keep changing things to sell more toilets

I was given an old Ryobi 10" miter saw after being able to pick around an old dude's garage, and decided to clean it after the safety pin became stuck in the safe position (which locks the arm down, so I HAD to fix it anyway). Here's some process shots and cool things about it.

First picture is of the electric motor inside...this is the commutator, which acts as a mechanical rectifier and converts the AC power input to DC. It does this like any other brushed DC motor by using two static brushes to act as pos/neg. The brushes hit different copper segments as the commutator spins, and this changes the polarity inside the copper windings of the armature. The field generated by the armature windings interacts with the generated stator magnetic field and thus creates a continuous unidirectional torque, which then connects to the saw to spin it.

I want to use a wall SOMETIMES for a projector, and the rest of the time I want to hang pictures (with frames). Unfortunately pictures require nails. I though about getting some strong magnets to hide in the wall, so I can hang up pictures with the power of magnetism. Is this a good idea or not. The pictures would pull parallel to the magnet so this might be shite

build additional XL long 2 car garage off existing one car-door garage. To make it simple, make existing interface fit under existing garage end wall roof line, with same pitch.

And IMO that could look good or at least "like they meant to do that".

Old one door garage becomes extra random sq ft transition from garage to house, because you can never have enough garage space.

OK idea or not? Real prob is Zillow Lot Lines are really lame and looks like existing garage is very close and would be almost unworkable to extend.

God, I can't wait till AI takes over the RE agent biz.

If you list a house, and CHECK THE LISTING YOURSELF and see Lot Lines are all fucked up, how about include a DIY map of correct LLs.

I've yet to see a listing I wouldn't grade as higher than D+.

I turned on my garbage disposal with this silver spoon in it. Is it possible to hit this with a torch and smooth it back out?

I have a nightstand drawer with no stops, so the drawer just comes out if I pull it too far. How do I fix it?

The drawer is very simple. There is just two grooves on either side of the drawer and they slide onto the grooves on the inside of the dresser.

How much of a pain in the ass would it be to buy and renovate something like this? And how would you do it? It sits on 4 acres, has a small creek and well, small EU village and it's for sale for 20k.
It's the only feasible way for me to get into the home ownership game.

Anyone researched and built a solar dehydrator for food?
I can't find good resources about how they're supposed to work and what the best designs might be.

>Spend weekend with parent inspecting old house we lived in when I was in high school, which he rents out but is in between tenants
>First time visiting in more than a decade; went upstairs and laid down in my old room and just stared at the ceiling for a while
>AC cuts on, pleasant hum
>Everything is in decent condition
>Life there wasn't perfect but I do miss it
>Come back home to rentoid box
>Pass by the hallway minisplit heat pump, whisper quiet at all times
>Go inside
>Half the kitchen outlets are out
>GFCI outlet near the fridge keeps tripping; unplug the fridge, reset, leave for a while, come back, plug in only the fridge, trips immediately
>Call maintenance, tell them we need a fridge replacement
>Guys come, fuck around all day
>End result: they tried to replace the fridge outlet and GFCI outlets and now none of the outlets on that circuit work
>About halfway through, I call the front office and ask them to call out an electrician because these guys are nice but don't know what they're doing
>They finally agree to replace the fridge, but since none of the outlets work, I'm not transferring all my food to a warm fridge
>They'll be back in the morning to fix the outlets
>I could literally do all of this myself but it'd break the lease
>AC cuts on
>Loud as balls because the main return is like 3 feet from the blower

I want to make a little library. I can buy a kit, but I want to have one where I don't need to dig a hole and make a post. Any ideas there?

Or anyone know a good old box that'll make a good substitute?

Ok so I have this giant, old, and mostly hollow model kit (pic related). I want to wire it up with lights. My goal is to have it where you can push a button, and it will play an mp3 file, and the led lights will all light up to the tune of the music. I dont mind manually programming the lights if I have to, but I'd prefer one, compact device to do it all with. I have coding experience, but I'm just wondering what the best device to get would be.

I want to build a 2.7m x 3m catio using this lean-to car port kit. the roof will be made out of 10mm polycarbonate sheets with aluminium/pvc F-sections and rafter bars. I want to install gutters too to collect rainwater in a butt.

what should I put on top of the frame to make sure the roof is sloped? I don't want to make any amendments to the frame or posts themselves so the top of the frame will be completely flat. but I know the roof needs to be higher at the back than at the front.

how would I build a door in one of the front two bays? I'm a diy novice and only have a normal saw

any other tips or glaring omissions are welcome

Hi, folks. My toilet has an issue where it constantly filling the toilet bowl from the tank, causing it to refill a half inch in the tank every 15 minutes or so. I figured out that this orange rubber ring has gone soft and warped and needs to be replaced because it's not holding a seal. Thing is, I don't know what that's called. It takes up the spot that would normally be occupied by a flapper, but it seems to be a different mechanism.

I tried to remove it but there is a piece that extends through that pipe into the exit hole that prevents that. I'm sure I can figure out how to do the repair, I just need to know what to actually type into google/youtube. Thanks.

I'm considering renovating a house, but before, i gotta know what root cause issues exist.

It's probably moisture/humidity related but tf is going on with this carpet?

I don't think there's pipes underneath...

To what extent does it spell true that blue collar work is filled with feral, room temp IQ macho wigger schoolyard bully types (dudes that unironically think that wiping your ass is "gay") with the EQ/conflict resolution/emotional regulation skills of a 4 year old low functioning wall hole-banging autist - who would basically be stray, out of control beasts if they didn't have blue collar work to keep them in check/as a means to channel all of their brute adrenaline/energy into?

new cuckpod just dropped
https://www.youtube.com/watch?v=D3XFIa7Fz80

Hi

Im trying to make some Zinc Sulfide but i can't find an tutorial on how to. I hope you guys can help me make this

It would be cool if you guys also help me find some source of Zinc or Sulfur (buying literal zinc and sulfur is not really an option for me, sorry) i do have some zinc supplement at home but i think it wouldn't really help.

Is it stupid to show up as a new apprentice with high end tools? Im in my 30s and decided to stop officecucking and started as a carpenters apprentice, hence why i had the money for nice tools. Ive done basic carpentry on my own but dont know much. Is it going to rub people the wrong way that a day 1 guy has top of the line shit? Pic related

I want to make a board game. Nothing super professional and I have no delusions about it, but it would be nice if I didn't have to write out all the cards by hand.

Just curious if anyone had any suggestions or ideas?

.

anons i just joined a new job and I am way way underqualified but they still chose me....

SO please help me design a very cheap system that can intake 500kg of mucileganous semi solids (think okra slices), in order to dry down to a specific moisture %. This input is 90% water.

What are some unusual/non-lawncare, nifty string trimmer attachments?

What is the most sedentary trade? Is it also the most generally out of shape one?

I want to install a bathtub in my bathroom. I talked to a company and they told me that the correct way to do this is to rip the floor, do the plumbing again, rip the wall, do the plumbing again. I said
>but what if you just connect the bathtub drain pipe into the existing shower drain
to which they said
>you can do this, but the tip is too short, no professional contractor will sign that off
I wonder how much were they bullshitting me.

I also talked to three other companies:
- one ignored me
- one told me they only do complete renovations
- one called outrageous price

This means that most likely what I'll end up doing is getting some small independent contractor who will do whatever I tell him to do, but I'm wondering if the guy warning me about the drain was correct.

containment thread for those of us who are not just weekend warriors.
>what are you workin on right now
>what do you like about your job
>what do you dislike about your job
>what was the last tool you bought

Me and a friend just finished laying down asphalt seal coat in our neighborhood, but someone drove over it about 5 hours after it was placed and left the marks shown in the image.

I am a novice tot this kind of thing (my friend led the way, but he’s a bit of a novice too). Will these marks go away quickly, or do I need to do something to remove them? They seem much more like dirt marks than actual imprints. I’ve read online they’ll naturally blend in as oxidation occurs and as other drivers begin to use the road, but I don’t know for sure on any of this.

This is a long shot, but is there anyone here who services appliances that could identify these two from the blurry picture my home inspector took? This is for a house I'm moving into in about a month.
I want to replace these two but don't have the dimensions, and I can't get in there until I close on the house. There's a labor day sale I want to take advantage of, and obviously I'd like to buy appliances that are the same size as what's there now.

I need to unload 24 pallets with bricks on my property, but I cant drive a big truck on it because there are power lines next to the street on my side. A truck with a crane wont fit under them. I also cant get them delivered and unloaded onto the street.

I was thinking to build something like pic rel, but it has to be free standing.

Constrains:
1: It needs to be movable so I can unload several pallets without having to move them.
2: It has to be done on uneven terrain (grass)

I thought about a double A frame with car wheels that are adjustable in height so I can compensate the terrain.
The connectors would be made ouf steel where I can just slide some lumber inside and bolt it down.
Has anyone ever done something like that?

>Option B, get a forklift, but they are expensive and/or might break down
>Option C unload the pallet by hand but that would take a lot of time and effort

I need to unload them as fast as possible because I need to rent a small truck to get them from the store. One pallet is about 1 metric ton.

Anyone into chain mail as an artform and branch of mathematics? Most people stick with European 4-1 for armor or byzantine and persian for jewelry but I'm trying to see how many different sheet weaves I can make into ~1" polyhedra. I believe that in general any weave capable of forming triangles, squares, diamonds, or hexagons can be made into a regular polyhedron and it's just a question of choosing the right ring sizes.

how to turn this into shower/tub?

I'm thinking kwik and dirty would be hang a loop from ceiling and hand curtains, but it guessing the tub is all sloped so it would be hard to just step out onto floor unless you were about 6'8".

so figure on ripping the fucker out???

My dang ol' original 3DS has paint chipping on the d pad, and I want to seal it so it doesn't progress. I want to avoid replacing the buttons entirely because it involves almost full disassembly and the 3DS is fiddly. What sort of glue or resin can I use to paint a clear cap over the cracks? I'm picturing something thin that I can paint over top in a few layers to build up a smooth flat coat. Or what would you suggest?