Thread 63891281

ITT: everything levergun

I'm in the market for a .22 and a .357/.38, my budget is $900 for the former, $1500 for the latter. Both guns would be mostly for plinking/LARPing, might use the rimfire for small game on a buddy's property, might use the centerfire as an HD gun because I live in ((New York))) and don't have my (((permit))) yet. I intend on outfitting both with peep sights and maybe a red dot for the centerfire.

>rimfire
For the .22 I was thinking of either a Browning BLR or a used Marlin 39A, leaning heavily towards the Marlin because it looks a hell of a lot easier to clean. Does anyone know if Ruger is going to bring the 39A back into production any time soon? Is anyone familiar with the Chiappa LA322? I've heard they're kinda chintzy but haven't handled one IRL. Thoughts on how the accuracy/smoothness compare between the two?

>centerfire
Winchester/Miroku 1892 vs 1873 vs Ruglin 1894. Which one does /k/ prefer? I've done some research and know that Marlin has a better warranty (although I doubt that a Miroku product will be troublesome) and that Ruger did a good job unfucking them, but I haven't handled any newer Marlin products recently to inspect fit and finish myself. Thoughts on accuracy, smoothness, reliability etc? Does anyone run a marble sight on an 1892, and does it interfere with the tang safety?

Name a more reddit type of gun.

>>63891304
You tell me. What's in your safe?

>>63891304
Kriss Vector

>>63891281 (OP)
buy a stainless rossi puma.in .357/.38 spec
peeps are available
be happy

>>63891304
>quintessential American rifle
>reddit
gr8 b8 m8

>>63891281 (OP)
>For the .22 I was thinking of either a Browning BLR or a used Marlin 39A
you mean BL-22.
the BL-22s are made in japan at least
https://www.browning.com/support/date-your-firearm/rifle/bl-22-rifle.html
henrys are made in the USA
>Winchester/Miroku 1892 vs 1873 vs Ruglin 1894
check to see if any of them are gay with .38. sometime lever guns aren't reliable with .38/.44 special. miroku is obviously good to go. an 1873 should be a slicker action, but heavier. a marlin will be easier to scope/put receiver sights on but.
idk if the marlins accept tang sights out of the box, they do accept skinner receiver sights. all of the winchster guns will say on the sight if they are drilled and tapped to receive sights. I think they all are

>>63891304
pic related
>>63891397
>rossi

>>63891397
>Brazil

>>63891413
Right, thanks. I dislike the sheet metal cover on the Henries, it's dinky and toylike IMO. Thanks for the tip, i'll do some more research. One of the models I'm considering is the Marlin 1894 Trapper because it comes with skinners from the factory (I think the stainless is kinda guady but I like the corrosion resistance).

I really want to get one of the Henry supremes in 300 blackout… put a suppressor on it, find a comfy scope, and enjoy quiet plinking….. not mine, but pic related for what I’d like to put together.

>>63891281 (OP)
>>63891416
>Da jooooos
Hamas lost, Iran is about to get regime changed, palishits are getting exterminated, and even Putin loves us. Get fucked, loser.

>>63892518
Dysgenic and gross yid

>>63891281 (OP)
Ruglin 1894 .44 mag for sure, fit, finish, and action are based. Pairs well with my Red hawk.

>>63891304
AR15
>Heckin futuristic space gun
>"Multipurpose" despite being shit at everything
>Designed in california oblast
>Only exists because consoomers need muh heckin clone build
>Only used by retards, trannies, and all other extremist degenerates

>>63891355
>>63891364
>>63891400
>>63891416
>>63892748
day of the pillow soon fudd

>>63891281 (OP)
>Chiappa LA322
Handled one in store. Points well, lightweight like you'expect from a .22, external fit is nice. Then I tried the takedown feature and it took the store owner and me some 15 minutes to put it back together, so I ditched the idea of buing one. Sheetmetal and die cast internals loosely hanging on pins don't inspire confidence. I know that Henry .22s are cast potmetal, too, but they're designed around that (or the Erma guns they're copied from were), so they feel more robust.

Browning BL22 is very nice to both look on and handle, great fit, quality finish, short lever throw, all steel. A gun to pass to your grandkids. Heard they suck to work on requiring octopus levels of dexterity to reassemble, never tried myself. Checking some gunsmithing video on them may be a good idea.

How about used guns? Gives you some more options. I have a 70s Winchester 9422 and I love that little gun. All steel, lovely bluing, heirloom gun as well. Had to replace broken "Extractor, Left", but parts are available and cheap.

>>63892034
the h004s have pot metal, but the receiver cover is more substantial. you can always buy after market skinners. The only issue is skinners are kind of ass at being a target sight

>>63892120
I think those look so ugly
>>63892518
pic related

>>63893147
shame they don't have pistol grip stocks for the 1894s

>>63893376
>>63893424
shalom, yurocucks

>>63893543
>or the Erma guns they're copied from were
what? also I wouldn't buy a gun unless it was made in the US or japan

>>63893147
Nice. What group sizes do you get?

>>63893543
I've checked youtube and what you've said tracks. I just looked into the 9422 and they're on my radar now, thanks.

>>63894192
Defunct West German company that made lever action .22s back in the day. Don't know much about them.

>>63893147
This is an ultra sweet pairing!

>>63891281 (OP)
Looking at thumbnail i though it was bridge in middle of construction

>>63893376
Obvious fuddlore b8

>>63891281 (OP)
buy an add
(speaking of zhe joos stinging every penny kek)

>>63894424
>t.malding 11.5 plebbitor

>>63894436
It's "ad" retard.

>>63894513
Found the malding kike

>>63894519
Which makes no sense, retard. You got a lever or not?

>>63891281 (OP)
>I live in ((New York))) and don't have my (((permit))) yet.

>Why are you selling these anti-semitic pamphlets Moshe?
>If I have two cents from every brochure sold they are not anti-semitic anymore!

>>63894484
jealous of my chicken nugget dispenser modification. Can't get that on a Henry.

>>63894700
>retarded post, again
To what purpose?

>>63891304
fpwp

If you can find one of the Browning B92s from like 78-82(?).
Those are mechanically the same as the original 92s(no rebounding hammer/tang safety) and they're basically the strongest traditional levergun design. (ie, not a Savage 99, BLR, erc)

>>63894299
You're welcome. I really like my baby Winchester so I shill it whenever applicable.

Watched a video on BL 22 disassembly and the 9422 is a lot easier. No need for any other tools than a flathead screwdriver, and the only part that's easy to lose is a transverse pin holding the front and rear half of the bolt together, and even that only comes out when the bolt is outside. You can't slam it together like an SKS, but you don't need watchmaking skills either, just some patience and a little bit of wiggling.

9422 tend to have 11 mm dovetail on top, so fitting skinners peep sights (or some optics) is doable.

>>63895821
Nice. Do you ever clean it by just running a bore snake through the ejection port? If so is it as inconvenient as I imagine?

Also anons if I were to get a '73, do I need to worry about solvent dissolving the shell lifter?

>>63891281 (OP)
I hate tang sights so much it’s unreal

>>63897290
>inside him burns a fire
Kinda wierd.

>>63894299
>group sizes
I need to try that one day, I just shoot steel plates, pop cans, and water jugs out in the desert. Never really take it serious. I did put these holes in this steel with the .44 mag Remlin.

>>63894785
>food analogy
>unironically supporting kike consoomerism propaganda

>>63897452
Unironically doesn't know how rediculas this post is.

>>63897290
why, annoying to hold?

>>63897452
post guns, homosexual

>>63897283
>Do you ever
Yes. Once you get the little brass weight into the chamber it's easy. Some fine motor skills required but no neurosurgery, and at least you can see what you're doing through the ejection port.

More often than not I partially disassemble the gun, though. It's not difficult and lets me sweep the insides with a shaving brush to get rid of half-burnt powder flakes catching there. I would use boresnake even on disassembled gun out of convenience, it's too easy to scratch your fingers on pointy rear of the receiver when pushing a cleaning rod from the back, unless you use a really long rod.

Picrel is my pairing for cheap range fun.

>>63897452
>Incapable of understanding propaganda

>>63898503
Lmao I meant to say sarcasm

>>63897452
Cool story, I just added another chicken nugget holder to my AR-15, Fudd.

>>63899187
>holy heckin wholesomerino! I just love goyslop!
>this is what /k/ has been reduced to

>>63899196
Noguns foreigners shitting up the place? Yeah I guess it was always kind of like that. Worse now though.

>>63899196
>goyslop
the pure American SOVL that is the AR-15 cannot be matched by Jews

>>63899196
yes we were a nice kind place until you niggers shat it up

>>63899196
post gunz, no gunz yuro

>>63899211
>>63899216
>>63899218
>>63899223
>Low quality bait responses 1min apart
what blew up I'm not up to date

>>63899546
post guns or git out. this is a thread for Americans, not yuros

>>63899216
Based. IWI guns/accessories are goyslop. The Galil is literally just an RK62 with a bunch of retarded features (except for the night sights)

Anyone know what this extra screw on the Winchester 94 is for? it doesn't go into the stock and its really short so I assume it might be meant for a peep sight or something.

>>63901603
Damn I fucked up.

>>63899563
>post guns to the FSB database kumrad plz i am so lazy and need more rubles

>>63901603
>>63901606
yeah should be for a tang sight

>>63901627
yeah you are a nogunz yuropoor, probably from bongland. fuck off and eat shit. no gun owning American would bitch about muh russians

I guess this is as good a place to ask as any. there isn't an issue with supporting the rifle by the ever right? Like one of the ways I like to hold my henry, pic related, is to have the trigger guard for the lever in the palm of my left hand because it lets me get into a high power like target stance

>>63900825
You're just talking shit because you can't afford them

>>63891281 (OP)
>I've done some research and know that Marlin has a better warranty
does marlin even have a fucking warranty? the brands been passed around so much that even if the newest owners were willing to deal with it the people who knew how to fix it and those spare parts are long gone. its some poor ruger tech who inherited a problem.

>>63904184
I believe so, although I'm willing to buy used I'm generally looking at new production guns. I've heard that Ruger's doing a good job with the new Marlins and I've had good luck with Ruger's customer service before.

>>63894700
See >>63894519

>>63901606
I always liked the saddle rings, even tho least useful feature.

>>63907875
they had the saddle rings and ladder sights on the carbines forever even though a lot of the older examples had their saddle rings cut off by the final user. idk when they added the screw insert to the cuckhorns officially making them better than the ladder sights on the carbines.

>a thread about arguably the most american style of firearm ever
>only 5 people actualy contributing, 1 of them a yuropoor
>only 5 OC pics of guns, 2 of them by the same yuropoor
>meanwhile self-proclaimed americans shit the thread up by arguing about heebs and accuse eachother of being yuros

Burgers, get your act together, this is pathetic even for a mongolian basket-weaving forum...


>>63892034
>Brazil
Dunno, I've handled a Taurus copy of a Browning style .22 pump and it was pretty nice. Would have bought it on the spot if I didn't already have the 9422.
20 inch Rossi Puma in .357 is on my wishlist unless I come across a good deal on something a little fancier.
On the other hand, the new Rossi .22 Gallery pump guns are ugly as sin with their cross-bolt safeties and plastic trigger guards.

>>63908471
most Americans left this board because the mods are all no gunz yuros and canadians who ban people for posting threads that arent about Ukraine. pretty much all of the mods and all of the posters on /k/ are no gunz

>>63908740
It was better before the hack? I don't think so.

>>63891304
SKS.

>>63908759
the board has been basically unusable since the Ukraine war started and the hack just showed that they literally only hire reddit mods who have nothing to do with the 4chan userbase to be 4chan mods and jannies. like why the fuck do we have a tranny board? and they added meme flags to /pol/ right before the election so it would just be shit post central as opposed to 2016

>>63908882
>muh community
This whole website is a farce and has been. Except for /cgl/, good info there.

OP here, will most likely get an 1894 Trapper in .357. Thoughts? I saw a review for one in.44 and it had dogshit accuracy compared to other rifles in its' class.