Anonymous
10/9/2025, 6:13:07 PM
No.64376058
>>64375997
>And drilling a chamber isn't hard either, especially if you're printing a telescoped cartridge. You can use an end mill to drill out your chamber,bthen using a taper cutter, you can cut an ever so slight taper in your chamber using a taper cutter.
it's just hard to do when you only have a power hand drill and some REGULAR bits, no reamers no mill no drill press
I tried and while the regular 9x19mm casing fit it was sticky, you also need a hone to polish the chamber
>And drilling a chamber isn't hard either, especially if you're printing a telescoped cartridge. You can use an end mill to drill out your chamber,bthen using a taper cutter, you can cut an ever so slight taper in your chamber using a taper cutter.
it's just hard to do when you only have a power hand drill and some REGULAR bits, no reamers no mill no drill press
I tried and while the regular 9x19mm casing fit it was sticky, you also need a hone to polish the chamber