https://pomf2.lain.la/f/9w2q01ba.webm
https://pomf2.lain.la/f/9w2q01ba.webm
https://pomf2.lain.la/f/9w2q01ba.webm

PRIMER RELOADING FOR DUMMIES (vidrelated is MINE, ALL MINE, I FUCKING DID IT)
1) get antimony trisulfide and potassium chlorate
2) grind both SEPARATELY
3) carefully mix very small amounts 50/50 or 30 antimony 70 chlorate
4) extract primer from a casing
5) hold the primer with tongs and extract the anvil with a needle (very carefully, otherwise you will lose it)
6) fill primer with mixture
7) take a dropper or a thin stick, cover it with shellac/alcohol solution (shellac is usually sold in this form)
8) press the anvil down. THIS IS VERY IMPORTANT, IF YOU DONT PRESS THE ANVIL DOWN CORRECTLY IT WILL MISFIRE.
9) dry with electric dryer at 500 degrees celsius
10) prime the casing
11) PROFIT, vidrelated
man, it's not fucking easy. it's just not.