Does anyone know of a good adhesive for a little figurine like this?

I think it's ABS plastic.

>>11443848 (OP)
A little superglue should hold it. Just give it plenty of time to set and keep it all held together with sticky tack or somesuch

>>11443851
no paint the pegs and insides red. Wait til they dry and stick them back in. The paint will turn the pegs into friction joints and give it SUPER MUTILATION ACTION whenever you drop it and the limbs pop off again.

>>11443848 (OP)
Id try that model plastic cement by mr hobby (?). Just kinda sand the paint where the parts fit together first then paint the glue on and put the pieces together. Its held models together for me for years. Some real fiddly kingdom death monster minis to be specific.

>>11443848 (OP)
You shouldn't even need glue for a set like that, but the easiest would be just a tiny drop of any basic super/crazy glue. But most of those joints should be held in place easy enough by friction alone. I put together a Vaal Hazak from that line years ago and he never falls apart.

>>11443848 (OP)
That's designed to snap together without any glue. I've certainly never had an issue with any of them.

>>11443989
>>11444143
Some of them are like that. Gogmazios? No problem.

Pic related from the Final Fantasy series?

>>11444651
Wow forgot to finish my own comment:

Pic related from the Final Fantasy series? Definitely without a doubt needed glue, although the glue that held every other FF model together well seemed not perfect for this one.

>>11443881
Lel nice

>>11443848 (OP)
As someone with a few dozen of these things, the parts should hold together without any glue. Sometimes the wings can be a pain to get on, but a hairdryer if its too tight or a tiny drip of superglue if its too loose solves that. I guess glueing all the limbs on shouldn't be too difficult either if you wanted that for some reason.

>>11444696
That's the one, although I've found Nerg's legs don't want to stay in. Also surprised to see the little black stick part of the stand, not sure mine had that but I'll double-check.

>>11444724
They made 2 different Nergigante molds for the world series of figure builders, the second type stands up much higher and might come without a stand. Perhaps you have that one instead?

>>11444728
I'll check when I get the glue in.

While I'm on the subject of Monster Hunter, where did you get your models from? I've just been buying off of AliExpress.

>>11445577
I get individual ones from surugaya, though prices vary wildly per figure. If a new set gets released and I like over half of them I buy the box that has 1 of each so I dont have to gamble.

Loctite for plastics

>>11444651
Oh shit there's weapon figures? Kinda wan

>>11445577
Zenmarket’s mercari portal and suruga-ya are good for cheap gashapon.

>>11447866
There're a bunch. From FF7 there are 4 of the five weapons; as far as I have ever been able to tell, an Emerald Weapon was never made.

>>11444728
Neat!

>>11445577
eBay

Ended up using this because the other glue came in from Amazon rock hard -- twice.

It's a little runnier than I'd like, and it kind of just comes out of the tube by itself sometimes, but it was inexpensive, and more importantly the bond is strong.

>>11452660
Yeah you weren't kidding. There are a button of these things on eBay.