Thread 64113110

IIT: Dumb gun ideas you want someone to make.


I love the 357 magnum because it tickles my autism with 357 being (almost) the first few prime numbers. But it's always bugged me that the first prime number 2 is left out.

I want someone to make a prime revolver that fires 2 357 rounds per trigger pull. Top and bottom chamber fire at the same time. Can fire 3-4 times depending on if you have 6 or 8 rounds. 4 obviously being the preferred option since 2357 are the first 4 prime numbers and it all fits nicely. If you want to get fancy with it maybe even a model with a way to switch to single-chamber firing mode if you want.

I just made this mockup in gimp in a minute or two for a visual example obviously they'd make something that looked nicer

>>64113110 (OP)
Test

>>64113110 (OP)
Align the barrels horizontally and have the hammer be forked with two firing pins.

>>64113110 (OP)
>P90 style mag but with 5,56x45 and longer barrel
INB4 But muh ergonomics
yes the gun would be wide and T shaped but that doesn't make my dick any softer thinking about it

>>64113110 (OP)
>I want someone to make a prime revolver that fires 2 357 rounds per trigger pull
that would be a machine gun

>>64113110 (OP)
>over under revolver
but why

>>64113165
the 2011 1911 side by side isn't a "machine-gun"

just make two side by side triggers that are like literally 1 hair apart so they're technically split but mechanically actuate the same exact time

two 'trigger pulls' for 2 bullets isn't a machinegun

>>64113165
No, it would be volley fire, which is OK.

>>64113149
There's a 3D printed receiver that uses a BRN-180 upper and P90 style mags.

>>64113210
So kinda like AR-57?

>>64113165
By that logic any double barrel that can be set to fire simultaneously should be considered as a full-auto shotgun.

>>64113110 (OP)
Gas operated johnson rifle

>>64113302
shut the fuck up asshole, don't give the feds ideas

>>64113210
>>64113280

I personally like the st50. Drops from the bottom for easier reloading and there's a jungle clip attachment you can buy. Word from a fairly large guntuber is that he talked to stuff and things and they said they're working on an FRT mod for it

>>64113302
double-barrels have two triggers, i.e. two trigger pulls.

>>64113130
this anon's got a good idea here.

>>64113149
you would need a non tapered cartridge case, perhaps a 350 legend mag could work or other straight wall cases

>>64113149
black ops 4 had the idea but with the mag to the side as its better to have a taller gun than a wider gun

>>64113110 (OP)
>IIT: Dumb gun ideas you want someone to make.

I want a revolver chanbered in 7.62x39
That's it

>>64113149
>>64113210
>>64113280
P90BLK. I don't really care for the look, I think it should have been designed for shorter loads. There's also the part where the action has to be mounted upside down to feed from the top so it ejects from the wrong side, and the part where it takes over $1000 in parts to build a gun that looks like a shitty cosplay replica.

https://odysee.com/@shadowhunter55:7/P90BLKV1.0:b

Moonies already have one in 300blk nigger

>>64113567
>all of my firearm knowledge stems from video games
ok retard

>>64114433
what sxs shotgun has one trigger and can be set to volley mode

>>64114459
Nta but I’ve seen a couple broken shotguns that consistently drop both hammers on a single trigger, single shot gun. Not fun no matter what it may look like in Doom.

>>64114277
It's bad to have a gun that's horribly unbalanced though, all of that ammo weighs weight. It should have a 45* canted magazine instead.

>>64114277
>>64114482

Design a system where it has one mag on each side. Ejects higher up or straight down. For reliability's sake have it fully feed one magazine before the other. For memes and even more complicated shit design a system where it flip flops which side feeds the bullet so both sides lower at the same rate. Maybe some physical block that rotates as the gun fires only allowing one side then the other idk

>>64113149
>>64114014
>>64114277

>>64114014
Mentlegen: A .30 cal M2 Carbine with a P90 style magazine.

>>64113110 (OP)
Electronic silencer :
Two gates, one at the entrance one at the exit of the silencer. The two gates are timed electronically to open when the bullet arrives and closes instantly after it, resulting in no overpressure when the chamber opens and a sound suppression never seen before.
>t. French engineer

>>64113110 (OP)
Asymmetrically-shaped rifle which is extremely ergonomic, but can only be held left-handed.

>>64113110 (OP)
I want handguns larger than .50

>>64113110 (OP)
I want a .357 mag smg/pcc

>>64114773
Wouldn't the overpressure be much greater if the gates closed right after the bullet passed through them? You would basically turn the bore into a closed pressure vessel. It would be like welding the muzzle shut and firing a blank- instant pipe-bomb.
What kind of electronically powered valve could even open and close that fast and withstand that amount of pressure?

>>64113110 (OP)
Shut up, dead weight

>>64114773
Why not just have an electronically actuated bramit device?

>>64113110 (OP)
Gas operated johnson rifle

>>64113149
>>64113489
>super long ST50 bullpup
>ammo belt extends out of magazine ala >>64091421, but reversed, looping into open bolt behind grip
What point does this serve? No clue but it would look interesting.
Guess it would weigh down the front end to reduce bucking for the first dozen rounds.

>>64113130
Then you'd have a much harder time timing the cylinder because you have to skip a chamber

>>64113204
I love mine and carry every day, But range is terrible unless you load one barrel and leave another empty. It's because of the physics involved with two gas expansions happening side by side without a long enough delay. Apparently Navel ships figured this out awhile ago. But for walking up behind someone and merc-ing someone without pulling a gun out it's perfect. I can't think of any other shrouded hammer snub nose's on the market but would love to hear one. Decent snake shot lead round combo won't throw off your aim too much, but it's pulls to the right and low so you have to adjust a bit. Used the double barrels for livestock and once a gator's skull. Puts them down pretty good.

As for OP, I'd like to see a Top break revolver with three cylinders and a bolt system on the underside keeping it tight and cycling the next cylinder. In 410 dragons breath.

>>64113110 (OP)
Man-portable minigun in a tiny pistol caliber.

pls hire me Beretta

>>64117567
>the filename

>>64117567
Isn't that just a sized up .22 bobcat with a slide safety? They likely could do that to 9mm, but they won't.

>>64113149
For me? It’s a p-50 in 22tcm, with a longer barrel built around a *checks notes* 100+ round quad stack mag.

>>64113110 (OP)
I don't think my idea is dumb enough for this thread, but what I want to see is an inertia-driven .45-70 rifle. Tube fed, capable of cycling black powder or smokeless with some adjustment.

>>64113130
straight pull

>>64113110 (OP)
.2357 is not an option?

>>64114277
It's stupid beautiful and therefore based, who's gonna make it?

>>64116211
But you’re wrong?

>>64114821
One snag: Destructive device regulations.
But I'm with you, and I think we can do something with a .50 bore and a bottleneck case.

>>64117567
we can go further

>>64113110 (OP)
A modernized Le Mat. 9 rounds, plus the shotgun shell.

I also want a electromagnetically-fired fletchette rifle with explosive fragmentating tips, basically to blow apart a door and anything behind it.

>>64117801
They tried with the tomcat. The frames crack with standard pressure .32 acp.

THE DARKNESS OF NIGHT FALLS AROUND MY SOUL AND THE HUNTER WITHIN LOSES CONTROL

>>64118398
S U P E R
M
O
L

>>64113110 (OP)
OP looks like this

>>64113110 (OP)
5.56 revolver. I don't care, it'd be awesome.

>>64114277
If space battle become a thing, wouldn't barrel shrouds full of liquid come back into style since you'd need something to dissipate heat?

>>64113110 (OP)
mp7 semi-auto chambered in 5.7.

>>64119454
probably, yeah

>>64113110 (OP)
Hi KelTec,
you want money making ideas?
hire a based antisemitic racist to be your social media manager

trust me
be on the right side of history

>>64117801
>They likely could do that to 9mm
Straight blowback and 9mm aren't friends without an absurdly heavy slide

>>64116211
Retard

>>64113191
It’s a revolver, if one is slightly off, you’ll end up with (at best) the gun now firing and (at worst) a kaboom

I want a modern version of pic related, possibly offered in multiple calibers. I just think a small bolt action chambered in a pistol round would be fun.

>Tactical intigrally supressed .357 tube-fed straight pull back bolt action rifle.
Pls somebody make it happen.