← Home ← Back to /o/

Thread 28503626

18 posts 14 images /o/
Anonymous No.28503626 [Report] >>28503637
can you japscrap do this didnt rhink so

my dad tacoma couldnt do 50 with a couch in the back you need big tire for real work and you try to load more than 15 sack of quickcreat it will fold just like hiroshima and nagasaki
Anonymous No.28503637 [Report] >>28504108
>>28503626 (OP)
>5 lugs
ngmi. Nice lifestyle vehicle.
Anonymous No.28504108 [Report]
>>28503637

5 big lugs you japscrap with 3/4 inch lugs can have 20 an thay still brake with only one 55 gallon drum in the back
Anonymous No.28504148 [Report] >>28504159 >>28504178 >>28506663 >>28507186 >>28507215 >>28507256 >>28507304
enjoy working that shovel, nigger
Anonymous No.28504159 [Report]
>>28504148
>nods respectfully
Anonymous No.28504178 [Report]
>>28504148

>tfw this has a 10' bed, 4,400 lbs up to 6,600 lbs payload and a smaller footprint than a CCSB
Anonymous No.28506404 [Report]
>comparing an F150 to a Tacoma
>ESL-tier writing
Anonymous No.28506663 [Report]
>>28504148
OP has been quiet since this dropped
Anonymous No.28507186 [Report] >>28507211
>>28504148
how does having a side dump compare to a rear dump setup? i can only imagine that shifting a load can shake the footing a bit.
Anonymous No.28507211 [Report] >>28507308
>>28507186

It's a 3 way dump. Can dump either side or rearward.
Anonymous No.28507215 [Report]
>>28504148
kek enjoy going to walmart in your tonka truck how's the wife supposed to drive this
Anonymous No.28507225 [Report]
>can you japscrap
>my dad tacoma
Anonymous No.28507226 [Report] >>28507231 >>28507256
If you can't carry a car on the back of your truck, is it really a truck?
Anonymous No.28507231 [Report]
>>28507226
baste
Anonymous No.28507256 [Report] >>28507277
>>28507226
>>28504148
>inline poor diesel
this is an enthusiast board
Anonymous No.28507277 [Report]
>>28507256
Show bed
Anonymous No.28507304 [Report]
>>28504148
Anonymous No.28507308 [Report]
>>28507211
Neat, how does it work? Do you just physically insert/remove pins from those 4 corner balls things (depending on which way you want it to tip), and the ram is freely rotating/spinning and just sort of works itself into the right orientation?