Thread 28679211

19 posts 8 images /o/

Anonymous 10/19/2025, 7:36:57 PM No.28679211 >>28679448 >>28679786 >>28679808 >>28680067

How autistic is /o/ ?

IMG_3178.jpg md5: a94d1418... 🔍

How are my fellow /o/tists today?
Did autist things?

Got some new tools?

unironically

Anonymous 10/19/2025, 10:23:35 PM No.28679448 >>28679775

>>28679211 (OP)
I stripped my race car down and weighted every part in the entire car.
And recorded about 1,000 parts

Anonymous 10/20/2025, 1:25:04 AM No.28679719 >>28679736 >>28679775 >>28679915 >>28680372 >>28680373

Screenshot 2025-10-19 at 4.24.36 PM.png md5: ca63f4ac... 🔍

wrenchlet here whats the name of this part called ?

Anonymous 10/20/2025, 1:34:49 AM No.28679736

>>28679719
short block

Anonymous 10/20/2025, 2:12:50 AM No.28679775 >>28679957

>>28679448
did you post the weights to beamng for modders to use?
>>28679719
which part? the engine block or pistons?

Anonymous 10/20/2025, 2:19:27 AM No.28679786

>>28679211 (OP)
Twongi doesn't need much right now, just some steering rack boots and a wheel bearing, and I got next week off so I'll get that stuff sorted then.
This is the 1.6 Lancer, right? I assume you got that clutch fitted in the end.

Anonymous 10/20/2025, 2:39:03 AM No.28679808 >>28679826

>>28679211 (OP)
I drilled out the internal ports of my catchcan because it was causing positive crankcase pressure. it's threaded for 1/2 npt using 5/8 fittings yet the internal ports were only 3/8 diameter. Drilled that fucker out to 1/2 and it's fine now.

Anonymous 10/20/2025, 2:51:31 AM No.28679826 >>28679831

>>28679808
surprised a small increase had such an effect. then again going from 9.5mm to 12.7mm is more than a 20% increase in diameter

Anonymous 10/20/2025, 2:58:03 AM No.28679831 >>28679834

>>28679826
20% increase in diameter, but more importantly a jump in cross-sectional area from ~280mm^2 to ~500mm^2 or almost 80%.

Anonymous 10/20/2025, 2:59:46 AM No.28679834

>>28679831
Wait my bad, it's 70mm^2 and 126mm^2, but the percentage is the same.

Anonymous 10/20/2025, 4:16:40 AM No.28679915

>>28679719
that theres a moder

Anonymous 10/20/2025, 4:48:30 AM No.28679957 >>28679998

>>28679775
Ya, I posted every entry to the forums.
Maybe someone will find it useful eventually.

Anonymous 10/20/2025, 5:10:50 AM No.28679998 >>28680000

>>28679957
based
if i ever get filthy rich i'll spend my free time tearing down cars and weighing all components for beamng modders to go to town with while im restoring them then selling for cheap to under 25s

Anonymous 10/20/2025, 5:11:34 AM No.28680000

>>28679998
Based

Anonymous 10/20/2025, 5:55:40 AM No.28680067 >>28680521 >>28680627

unnamed.jpg md5: 301e6dd7... 🔍

>>28679211 (OP)
>Did autist things?
started removing the valve covers to do a compression test, then decided i would rather not check the compression and just throw some new parts at it. van chasis and a diesel engine = no space to work on engine

Anonymous 10/20/2025, 1:12:47 PM No.28680372

>>28679719
I dont know ,but I have friend who doesnt know either

Anonymous 10/20/2025, 1:15:01 PM No.28680373

>>28679719
that's the motor for the automatic antenna

Anonymous 10/20/2025, 4:43:53 PM No.28680521

9a010a4c81dfbeea81f6894743a2fe48.jpg md5: d04ff971... 🔍

>>28680067
Do instruments go in front of that assfuck working area or is it just a merciful plastic panel?

Anonymous 10/20/2025, 5:56:01 PM No.28680627

>>28680067
Based 7.3 powerstroke van bro.