>>105968731 (OP)
Get a soldering iron and the other switches. Logitech uses the switches rated for a higher voltage which corrode over time. If they would use the correct switches, they wouldn't sell any mice anymore because they just wouldn't fail anymore.
>>105969140
Natural rubber isn't toxic to humans.
Synthetic Polymers are. I'm talking about the hard-shell and the lacquer that's coating the plastics.
>>105968731 (OP)
It can be fixed by flattening the small copper contact inside the clicker or replacing it using one from a broken old mouse, as long as you know how and you are skillful enough to open the clicker and put everything in place again.
>>105968818
Place a thin piece of hard plastic paper cut in the right shape inside the wheel encoder to increase the pressure just a little so it doesn't jitter but is not hard to roll.
>>105968751
This was an interesting theory on why they fail.
I ordered new omron switches, i have to replace them every year.
What I should do is come up with an optical or magnetic replacement, but the switch is pretty small so it makes it a bit difficult.
It might be worth while to come up with a “de-bouncer” to get rid of the extra click if it’s within a few milliseconds.
Although, thinking about it now, this could be done in software.
My G403 still works perfectly after 5-6 years and I played Minecraft 1.8.9 PvP (clicking 10+ CPS for extended periods of time) for like half of that time. I don't understand what you spergs do to your mice.
I still keep it around as an extra 'work from home' mouse cause when I balance the laser/led/sensor just at the edge of a cd jewel case, it acts as an undetecable mouse jiggler and my cursor moves on it's own.
