← Home ← Back to /k/

Thread 64133652

179 posts 84 images /k/
Anonymous No.64133652 >>64133661 >>64133664 >>64133668 >>64133732 >>64133755 >>64133921 >>64133973 >>64133985 >>64133999 >>64134108 >>64134315 >>64134373 >>64134663 >>64135130 >>64135145 >>64138626 >>64142409 >>64142792 >>64143076 >>64143280 >>64144499 >>64144905 >>64145450 >>64150740
Buy American, they said.
Wanted to exchange my Chinese optic plate for a US made product. Bought from made in America/China bad company. Doesn’t fit my Glock. /k/oping hard rn
Anonymous No.64133661 >>64133677
>>64133652 (OP)
sand it down?
Anonymous No.64133664 >>64133697
>>64133652 (OP)
you're supposed to get them fitted and because there's extra material its a slow process of level sanding with tools you don't have
>extra material is a good thing in this case
Anonymous No.64133668 >>64133732 >>64133808 >>64134074 >>64143611
>>64133652 (OP)
Oh lawd, they even exclude Chinaman optics from being used on their plates. Is this their way of preventing holosun optics being mounted on their plates?
Anonymous No.64133677 >>64133985 >>64144499
>>64133661
After having paid top dollar? What communist magic is this, where the customer has to invest labor to finish the product after having paid full price?
Anonymous No.64133685 >>64133692 >>64133707
youre putting it in crooked, try putting it in straight
Anonymous No.64133692
>>64133685
maybe this, light taps both sides with a block of wood on top covered in a rag
Anonymous No.64133697 >>64133985
>>64133664
But of course, all my Chinese stuff says

>sann down fol best expelience
>use sandy machine (vely expansive) to customise ploduct if need.
>fuck you gajin fo aspecting qwaloty
Anonymous No.64133707 >>64133744 >>64134395 >>64138626
>>64133685
Yeah, tried to put it in upside down instead. No success. Ignore me measuring the plate telling me exactly it’s out of spec, I should just wiggle it around.
Anonymous No.64133725
look at this idiot
Anonymous No.64133732 >>64133747
>>64133668
>>64133652 (OP)
Which company? Have you contacted them?
Anonymous No.64133744 >>64133751
>>64133707
i didnt say upside down i said crooked
Anonymous No.64133747 >>64133816 >>64133821
>>64133732
Forward Control Design. No, and not going to. They are fags stating shit like function over form when it’s clear they can’t even get the form right. Also picrel shit.
Anonymous No.64133751 >>64134398
>>64133744
Humor is hard
Anonymous No.64133755 >>64133761 >>64133807 >>64145846
>>64133652 (OP)
>He fell for the FCD meme
lmao idk how people keep doing this. All their AR small parts breaking from terrible nitriding should have sank the company, making trash that costs 10x as much as mass produced cast pot metal while being infinitely weaker would have been a death blow in a sane world.

But retards gonna retard, so as long as a company charges more for basic bullshit, some asshat who doesn't shoot will buy it.
Anonymous No.64133761
>>64133755
Upvoted for visibility
Anonymous No.64133807 >>64133827 >>64133950
>>64133755
Probably kept afloat by retards who think "made in America" is some sort of inherent marker of quality.
Anonymous No.64133808 >>64133818
>>64133668
>order RMR plate
>REEEE WHY DOESNT THIS WORK WITH HORRRO SUNNN!!!!!
get a load of this retard, congrats every company has the occasional QC failure, contact the manufacturer
Anonymous No.64133816
>>64133747
>I bought the neckbeard beer gut grey american flag shirt gun sight plate
You get what u paid for faggot
Anonymous No.64133818
>>64133808
Why wouldn't it? My RMR mount is made by Trijicon (you know, the people who make the RMR) and it works with holosun optics just fine.

Course, it also fits properly, because it's made by people who aren't incompetent.
Anonymous No.64133821 >>64133827 >>64150676
>>64133747
>won't contact company
>comes to 4chan to bitch
checks out
Anonymous No.64133827 >>64133890
>>64133807
I think of them more as the retards who make shitty AR parts that redditors blow their loads over
>>64133821
>buy premium product
>it's worse than bargain bin product
>waste your time dealing with the company!
Not OP but nah, an optic plate isn't worth my time. Just never buy from them again and move on.
Anonymous No.64133836
I only buy European or Asian products if I can. American made is almost universally shit tier, unless we’re talking specialty stuff.
Anonymous No.64133850 >>64133865
Dont bother with this shit thread, just an idiot going
>amelika bad
>china so good dont u see?
Anonymous No.64133865 >>64134026
>>64133850
You need to stfu, sucker. Letting others know which products are subpar is peak community service.
Anonymous No.64133890 >>64133913 >>64133917
>>64133827
>it's another he swipes the credit card before reading post
https://www.forwardcontrolsdesign.com/OPF-G-RMR_p_224.html


>Due to the +/- 0.005 tolerance of RMR and SRO, the plate may need to be fitted in order for the sight to fully seat. This should not be considered a drop in part.

>Trijicon's tolerance between the recoil lugs to the front radiused edge of the RMR is +/- 0.005. While every OPF-G, RMR has been tested on our RMR and SRO, there is always a chance it might not fit your RMR/SRO without fitting. OPF-G, RMR's design cradles the sight tightly on the plate between the plate's front and rear fences, some fitting may be required. A competent gunsmith can do it easily if you're uncomfortable with fitting the plate to your sight.

>OPF-G, RMR is compatible with factory MOS (Gen 4 and 5, including the new Gen 3 CA MOS) slides: G17, 19, 20, 21, 22, 23, 26, 34, 40, 45, 47, 49 and 40. Both RMR and OPF-G, RMR are wider than G17, G17, G45, G47 and G34, and have a slight overhang on both sides of the slide. On 1.08" and 1.12" wide slides, the overhangs are gone. The front two corners for the plate don't match the wider slide's contours, this is but cosmetics. For more info, please visit this page: G20, G21, G22 Compatibility
Anonymous No.64133899
>ITT: Gays realizing Made in America actually means ore mined in Africa, refined in India, machined in China and assembled by Pedro and Yamal in the US
Anonymous No.64133913 >>64133930 >>64133943 >>64133976
>>64133890
>RMR and SRO have tolerances
>therefore plate doesn’t fit glock frame.

Is this US reading comprehension?
Anonymous No.64133916 >>64133944
This is an anti-american/pro CCP advertising thread and every bump keeps the OP pic and OP sentence in the thread catalog.
The purpose isn't about the two guys here who already posted how the sight mount is made and why, it's so anyone sees that OP post and goes
>ha yeah, stupid americans, suck so bad

This is a shit thread and the OP needs to be publicly tortured to death.
I'm fond of starting immediately with breaking all the finger joints and then ripping an eye out. That's just how I start.
Anonymous No.64133917 >>64133930
>>64133890
kek, OP confirmed too lazy to read entirety of product description
Anonymous No.64133921
>>64133652 (OP)
better than all of my CZ optic plates and filler pieces which have a gap on both side, so the tiny screws are taking all the recoil.
Anonymous No.64133930 >>64133943 >>64133976
>>64133917
See >>64133913
Even as an ESL I understand that they claim trijicon’s tolerances can pose a problem. Nowhere in that text it says something about not being able to fit the Glock slide.
Anonymous No.64133943
>>64133913
>>64133930
THE PLATE NEEDS TO BE TRIMMED TO FIT BECAUSE IT IS MEANT TO BE A SOLID, STABLE, NEAR-PERMANENT INSTALLATION THAT NEVER WEARS OUT.

YOU RETARD.
Anonymous No.64133944 >>64133952
>>64133916
>buy extra expensive made in America product
>it doesn’t fit
>start hey guys, this sucks thread
>reeeeeee you are anti American agent of china
Anonymous No.64133950 >>64133966 >>64142737
>>64133807
Made in America or not made at all faggot
Anonymous No.64133952
>>64133944
动态网自由门 天安門 天安门 法輪功 李洪志 Free Tibet 六四天安門事件 The Tiananmen Square protests of 1989 天安門大屠殺 The Tiananmen Square Massacre 反右派鬥爭 The Anti-Rightist Struggle 大躍進政策 The Great Leap Forward 文化大革命 The Great Proletarian Cultural Revolution 人權 Human Rights 民運 Democratization 自由 Freedom 獨立 Independence 多黨制 Multi-party system 台灣 臺灣 Taiwan Formosa 中華民國 Republic of China 西藏 土伯特 唐古特 Tibet 達賴喇嘛 Dalai Lama 法輪功 Falun Dafa 新疆維吾爾自治區 The Xinjiang Uyghur Autonomous Region 諾貝爾和平獎 Nobel Peace Prize 劉暁波 Liu Xiaobo 民主 言論 思想 反共 反革命 抗議 運動 騷亂 暴亂 騷擾 擾亂 抗暴 平反 維權 示威游行 李洪志 法輪大法 大法弟子 強制斷種 強制堕胎 民族淨化 人體實驗 肅清 胡耀邦 趙紫陽 魏京生 王丹 還政於民 和平演變 激流中國 北京之春 大紀元時報 九評論共産黨 獨裁 專制 壓制 統一 監視 鎮壓 迫害 侵略 掠奪 破壞 拷問 屠殺 活摘器官 誘拐 買賣人口 遊進 走私 毒品 賣淫 春畫 賭博 六合彩 天安門 天安门 法輪功 李洪志 Winnie the Pooh 劉曉波动态网自由门
Anonymous No.64133966
>>64133950
She does not look like she was made in america :/
Anonymous No.64133973
>>64133652 (OP)
Who said buy american? Not me lil nigga
Anonymous No.64133976 >>64133996
>>64133913
>>64133930
That's the third paragraph. Guess you guys can't read either.
Anonymous No.64133981
Consider this a blessing. You don't need an optic on your pistol, it makes you look like a beta dweeb. Get good with irons, problems weren't.
Anonymous No.64133985
>>64133697
>>64133652 (OP)
>>64133677
you sound like some faggot who's having a real bad day and wants to shill some contrarian narrative.
hope your day gets better so you don't need to do that anymore bro.
Anonymous No.64133996
>>64133976
>OPF-G, RMR is compatible with factory MOS (Gen 4 and 5, including the new Gen 3 CA MOS) slides: G17, 19, 20, 21, 22, 23, 26, 34, 40, 45, 47, 49 and 40.

Wild claim, it obviously isn't.

>Both RMR and OPF-G, RMR are wider than G17, G17, G45, G47 and G34, and have a slight overhang on both sides of the slide.

Wider, not longer.

>On 1.08" and 1.12" wide slides, the overhangs are gone. The front two corners for the plate don't match the wider slide's contours, this is but cosmetics. For more info, please visit this page: G20, G21, G22 Compatibility

Where the fuck do you get the idea from that there is a problem fitting the plate to the frame?
Anonymous No.64133999 >>64134419
>>64133652 (OP)
>tolerances
Its chinesium MIM that they cant guarantee is properly sized because the process is shitty and leads to variance
Anonymous No.64134012 >>64134040 >>64134147
This is a very rare thread
>gun related
>op is hasguns
>op is not brown
>discusses gear
Yet people talk shit about op.
Anonymous No.64134026 >>64134073
>>64133865
The only thing you're letting people know with this thread is that you're an incompetent, likely illiterate, retard.
Anonymous No.64134040 >>64134070
>>64134012
>men when something doesnt fit from the dawn of our species: "hmm doesnt fit I guess ill fix it"
>fake and gay retarded zoomers: WAAAHHH IT DOESNT FIT IM GONNA GO CRY ON THE INTERNET ABOUT IT
in summation op is a fag and should be bullied relentlessly
Anonymous No.64134070 >>64134098
>>64134040
>Here is an expensive product.
>You will have to finalize it, despite it being expensive because Grug would have done the same. Also your warranty goes byebye once you put the sand grinder to it, too bad bruh.
>Read the FAQ next time, where it says nothing about the product being delivered defective and needing extensive work to be in a usable state.
Anonymous No.64134072 >>64134077
NIGGA JUST GET A FILE AND TWO QUICK PASS ON THAT BITCH DAM IS THAT THAT HARD YOU S TUPID AS SNIGGA
Anonymous No.64134073 >>64134083 >>64134233 >>64145686
>>64134026
Well, well, well, their Acro plate fits without problems and has zero wiggle room. So either they aren’t able to machine their stuff to spec, whatever spec that might be, or they have widely differing tolerances. Or no qc, despite being expensive as fuck. Which one is it, shill?
Anonymous No.64134074
>>64133668
cool flying sperm logo
Anonymous No.64134077
>>64134072
No.
Anonymous No.64134083
>>64134073
>everyone who points out my stupidity is a shiiiillll@!
fucking kek
Anonymous No.64134097
>may require filing and hand fitting to function
Oh, so PSA ar-15s are actually high quality products intended to be hand fit, like a high end 1911? Awesome.
Anonymous No.64134098 >>64134136
>>64134070
>Read the FAQ next time, where it says nothing about the product being delivered defective and needing extensive work to be in a usable state.
>Item Description clearly states fitting required
Anonymous No.64134102
>not getting your slide milled
Anonymous No.64134108
>>64133652 (OP)
Wow you're a fag. Get an angle grinder, or a metal hand file and shorten that shit up.

>picrel
>made a mecanik base plate fit a sig p365x
Anonymous No.64134136 >>64134149 >>64134225 >>64134320
>>64134098
Are all Americans unable to comprehend this text? Here, have GPT explain it to you. Its extra funny because it says be a little confusing on a first read lmao. Americans literally have no reading comprehension.
Anonymous No.64134147
>>64134012
OP cannot be saved from his own stupidity and totally legit!!! agenda.
He's not absolved from being a retard. He is still a retard.

Legitimate question, do you cry and bitch on 4chan about trigger pins on an AR requiring a punch to actually seat? Is the concept of tight tolerances requiring a little bit of force something that's wrong? If OP had any mechanical experience before this he wouldn't be bitching here, he would try getting the thing to seat properly through basic machinist tools and concepts. His willpower and effort is about as low as his IQ.
Anonymous No.64134149 >>64134208
>>64134136
>the plate may need to be fitted in order for the sight to fully seat. This should not be considered a drop in part.
Anonymous No.64134196
Nobody tell OP about aftermarket barrels.
Anonymous No.64134208 >>64134216 >>64134227
>>64134149
l2read.
Anonymous No.64134216
>>64134208
>I have depicted you as the dumb wojak and myself as the intelligent wojak
Holy fuck, this is hilarious.
Anonymous No.64134225
>>64134136
why are you posting AI like some sort of subhuman?
Anonymous No.64134227 >>64134248 >>64134408
>>64134208
>>the plate may need to be fitted in order for the sight to fully seat. This should not be considered a drop in part.
Anonymous No.64134233 >>64134237 >>64134262
>>64134073
>visible rust from neglect
I think we all know who is at fault here anon.
Anonymous No.64134237 >>64134240
>>64134233
if he was using vibratite like a smart person that's not rust, it's just left over thread locker
Anonymous No.64134240 >>64134262 >>64134278
>>64134237
There is no thread locker the color of rust, noguns. It's blue, purple, white, green, red or clear. Never orange.
Anonymous No.64134248 >>64134257
>>64134227
I am sure I am being trolled at this point. The plate may need to be fitted in order for the >SIGHT to fully seat. It doesn't say the plate may need to be fitted for the PLATE to fully seat.
Anonymous No.64134257 >>64134273 >>64134275
>>64134248
My nigger, do you not see the fucking picture of the plate, on the slide, with NO SIGHT FITTED, showing that it needs some fitting?
Jesus fuck, reading words verbatim but not being able to reason through what they mean is not the sign of intelligence you seem to think it is.
Anonymous No.64134262 >>64134270 >>64134368 >>64143262
>>64134233
>>64134240
No guns never applied loc or vibratite fag detected.
Anonymous No.64134270
>>64134262
>mouthbreather can't figure out how to use a hand file
>calls others dumb
Anonymous No.64134273 >>64134279
>>64134257
Remember he was here trying to make fun of Americans but all this is proving is he has the intelligence and reading comprehension of a 5 year old.
>Part no fit, PART IS BAD THEN
He would CRY having to use a punch and hammer and say the whole thing is somehow broken.
Anonymous No.64134275
>>64134257
Dude, READ THE TEXT ABOVE THE PICTURE! It talks about the plate not being immune to user induced abuse and gives an example showing a bent plate, because the user used the wrong screws and used too much force to fasten them.
Anonymous No.64134278 >>64134306
>>64134240
1. That isnt the color of rust
2. There is orange loctite
3. Loctite can oxidize and change color
Bonus
4. You are dumb
Anonymous No.64134279 >>64134306 >>64134308
>>64134273
Its impossible to be this dumb. You guys have to do this on purpose.
Anonymous No.64134306 >>64134325
>>64134278
>>64134279
>what is tolerance stacking
>NO YOU GUYS ARE DUMB
Anonymous No.64134308
>>64134279
t. Too illiterate to read instructions on an expensive product, too dumb to use files and brass hammers.
Anonymous No.64134315 >>64134320
>>64133652 (OP)
>website says this should not be considered a drop in part
>buys it anyway
>"WHY WON'T IT DROP IN REEEEE!!!"
Remedial English lessons may be helpful, OP.
Anonymous No.64134320 >>64134327
>>64134315
I am not even OP, I am just defending basic reading comprehension. See

>>64134136
Anonymous No.64134325 >>64134346
>>64134306
This is like a bizarre crypto advert for this brand of plate. Filters out people who can't change their own tires, has tight enough tolerances it needs some tapping into place. Leagues better than some plates I've seen made that require *horizontal* shimming because they fit so damn loose. Though I'm sure OP would love that (and then have a meltdown when he learns you still have to hammer in the shim.)
Anonymous No.64134327 >>64134331
>>64134320
Literally everyone in the thread understands what the product description means except for you and the robot that thinks 2+2 equal 5. You are the retard here. Sorry.
Anonymous No.64134331 >>64134337 >>64134340 >>64134350
>>64134327
None of you common core negroes are going to make me accept your outright idiotic views. You are people unable to comprehend basic texts, trying to drag me down to your level of complete idiocy.
Anonymous No.64134337 >>64134349
>>64134331
>"SHOULD NOT BE CONSIDERED A DROP IN PART"
>hmmmm, that must mean it drops in!
Anonymous No.64134340
>>64134331
I didn't know BSME was "common core".
Anonymous No.64134341
>putting optics on your pistol
Grow up and stop putting new doodads on your range toys, kiddo
Anonymous No.64134346
>>64134325
Imagine if he tried to build a 1911.
Anonymous No.64134349 >>64135111
>>64134337
Drop in part refers to the plate in relation to the SRO/RMR. If you dont get this from this text, I recommend Basic Reading for Grade 1 Volume 2.
Anonymous No.64134350
>>64134331
I've seen monkeys in the jungle using rocks as hammers.
And yet you are somehow dumber than that.
Anonymous No.64134368 >>64134389
>>64134262
>No guns never applied loc or vibratite fag detected
Nigga what
Anonymous No.64134373 >>64134415 >>64142791
>>64133652 (OP)
>may require fitting
>may not drop right in
>people ITT: THAT MEANS IT NEEEEEEEEDS TO BE FITTED AND YOU ARE COMPELLED BY THE LAWS OF PHYSICS TO GET IT FITTED OR ELSE THE UNIVERSE EXPLODES
Its liability language, their shit is poorly(probably not even machined at all and just MIM'd) machined and so has enough variance from part to part to not be guaranteed to fit out the box, but many will
Anonymous No.64134389 >>64134415 >>64134417 >>64134424 >>64142778
>>64134368
Sorry ChatGPT,
Technically it should have been written
>no-guns-never-applied-loc-or-vibratite-fag detected
But even an american 11 year old understands what they wrote.
ChatGPT you're dumber than an 11 year old american
Anonymous No.64134395 >>64134765
>>64133707
Just clamp it straight down and shoot 50 rounds through it. The energy should wiggle down into place
Anonymous No.64134398
>>64133751
or putting it upside down is retarded?
Anonymous No.64134408
>>64134227
Tldr....our quality control is shit and you might need to use a sledge
Anonymous No.64134409
Things that are machined to tight tolerance need to be fit into place. Fit into place means using force. Try a rubber mallet, or not being a pussy.
Anonymous No.64134415 >>64134573
>>64134373
>>People ITT
If OP is going to actually bitch and moan about this being the end of the world, people are going to tell him he's freaking out over a minor issue that can be fixed (impossible for him though). This is the kind of behavior of a spoiled child who'd rather buy a totally new product for 100 dollars instead of a 0 dollar solution to his existing problem. Nobody is blowing it out of proportion because it's such an easy fix and he keeps doubling down on how everyone but him is wrong.

>>64134389
Truly a golden text, truly an undisputed source of knowledge that is saying nothing of applicable technical merit and doesn't even know what the problem is
>Fitting the optic to the plate
Would be done via the screws and doesn't even apply to the actual problem here. You are too scared/stupid to use a hammer. You are wasting your time trying to double down on an anonymous website instead of just saying "screw you all I finally hammered it in hahaha I wasted your time I'm an epic troll" or something.
Anonymous No.64134417 >>64134573
>>64134389
>zoomer can't write or read without chatpgt telling him how
>calling anyone dumb
Anonymous No.64134419
>>64133999
>anon learned a new word this week, the post
Anonymous No.64134424 >>64134573
>>64134389
>writes fucking broken ESL gibberish
>no you're dumb because you couldn't understand it
Anonymous No.64134440
Lmao even
Anonymous No.64134573 >>64134603 >>64134701
>>64134415
>>64134417
>>64134424
>actual, verifiable retarded niggers spewing gibberish and schizophrantic thought
This thread is embarassing.
Anonymous No.64134589 >>64134642
>part maker talks about a size variance of 0.01 inch
>Why wont it go in! It was made wrong!
Nigger that spacing difference is 4 thousandths of a millimeter. We're talking about a precision level that is close to engine pistons and cylinder walls. Made wrong? One thing is for certain in this thread, a whole lot of you "people" are.
Anonymous No.64134603
>>64134573
>This thread is embarassing
For you, yes it very much so is.
Anonymous No.64134642 >>64134667 >>64134714
>>64134589
As an engineer, reviewing this thread, I find myself increasingly concerned about the apparent decline in educational standards. To clarify, the measurement in question is not four thousandths of a millimeter; it is four hundredths of a millimeter, as evidenced by the presence of two decimal places rather than three. Such a distinction is fundamental and should be well understood.

Moreover, this level of tolerance is entirely unacceptable for any industrial machine manufactured in Germany, the United Kingdom, or the United States after 1990. Components exhibiting tolerances this loose would be automatically rejected in quality control and typically signal significant degradation in the manufacturing capability of the machine responsible for producing them.

Quality control processes detect such deviations even when employing the most basic measuring instruments, jigs, or other standard measurement methods, indicating that no quality control measures were implemented prior to shipping these.
Anonymous No.64134663 >>64134712
>>64133652 (OP)
just fit your fucking components. Literally every other fucking gun needs hand-fitting for shit like this. you Glockfags are just as insufferable about stuff not being drop-in as ARfags.
Anonymous No.64134667
>>64134642
This isn't an engine bore. This is an optics plate.
This isn't a component that needs ultra-high tolerances to begin with and as stated before, it's such a trivial and easy fix.
Anonymous No.64134701
>>64134573
>if I keep saying everyone else is retarded, it'll come true!
My nigger, you can't even spell "schizophrenic". Or use the most basic hand tools. Or understand how tolerances work.
Anonymous No.64134712 >>64134723
>>64134663
Even with the standard machining equipment currently available, tolerances of the magnitude mentioned are virtually nonexistent. Modern machinery is simply incapable of deviating by several hundredths of a millimeter from its programmed path. Consider, for instance, precision-machined components such as firearm barrels, which are held to much stricter tolerance levels. Manufacturing processes are designed to consistently achieve these precise standards.

To illustrate, take the example of Glock firearms. It is exceedingly unlikely to find a Glock that left the factory with such a high tolerance on any machined part. Should a component with an excessive tolerance deviation make it through production, it would be immediately identified and rejected during quality control inspections. Rigorous quality control is essential to prevent entire production batches from falling out of specification, as such occurrences can result in significant financial losses. Ultimately, allowing such deviations would constitute an unacceptable business practice.
Anonymous No.64134714 >>64134732
>>64134642
>four hundredths of a millimeter
That's barely over one thou. The tolerances on bores and cylinders for fucking AGC cylinders in steel mills are looser than that.
Without knowing the tolerances of the cutout in the Glock slide, and what the tolerance specified for the plate is, you can't say shit about whether it's to spec or not.
Anonymous No.64134723 >>64134732
>>64134712
No fucking factory Glock barrel has a tolerance in fucking tenths, lmao.
Anonymous No.64134732 >>64134745 >>64135640
>>64134714
Glock manufactures all of their optic cutouts to a tolerance of 0.0002 mm. This stringent tolerance primarily arises from the coating process, which can occasionally result in variations in coating thickness across different areas.

>>64134723
I presume there may be a misunderstanding regarding the actual meaning of tolerances. If you were to examine and measure two Glock slides of the same caliber, you would find that the deviation between them does not exceed 0.0002 mm.
Anonymous No.64134745 >>64140949
>>64134732
>Glock manufactures all of their optic cutouts to a tolerance of 0.0002 mm
LMAO
Glock isn't putting fucking FRACTIONAL MICRON tolerances on a goddamn optics cut, get the fuck out of here.
>I presume there may be a misunderstanding regarding the actual meaning of tolerances
Yeah, maybe you should learn about them instead of regurgitating the Google AI search results.
Anonymous No.64134765
>>64134395
that sounds like some insane Fudd Cope take
Anonymous No.64134769
You're all sick people.
I hope you all get cancer. Fuck youse all.
I put a curse upon you all.
Fuck ya
mudda
Anonymous No.64134845
>all this garbage posting that came from me intentionally dividing 0.01 inch by 2.54 instead of multiplying by 25.4
0.01 inches is .25 mm, dumbass.
Congrats you trolled yourself for my amusement.
Anonymous No.64135111
>>64134349
Retard
Anonymous No.64135130
>>64133652 (OP)
Putting optics on handguns is super gay anyway.
Anonymous No.64135145
>>64133652 (OP)
Fuck off chang, we’re not buying your holosun optics.
Anonymous No.64135640
>>64134732
>0.0002mm
You're a retard
Anonymous No.64138146 >>64138595
>OP buys a non-drop-in widget without reading the description
>it doesn't drop in
>bitch on /k/
>gets called out
>OP claims he is a super genius and is actually reading between the lines and everyone else is retarded
>OP posts ChatGPT slop in his own defense
Anonymous No.64138595 >>64139469
>>64138146
I am still baffled at the mindset to shit on someone who rightfully expects a functioning product out of the box. Always thought this is a 4th world trait, because even yeets or niggers get angry when something doesn't work as advertised.
Anonymous No.64138626
>>64133652 (OP)
>>64133707
Kill yourself, whiny pussy.
Anonymous No.64139469 >>64141877
>>64138595
You're not saving this, OP. Bail out.
Anonymous No.64140941 >>64141877
ITT: amerimutts cannot make the most basic piece of accessory up to spec anymore and they insist that it MUST be this way. Also, you MUST read the fine print when buying the simplest stuff while being unable to read and obviously not doing it themselves. When dealing with Americans better lawyer up - they WILL try to scam you. American engineers still cannot convert numbers between metric and imperial systems.
Mind you that these are not "niggers and spics". They are just many generations removed from the center of Western civilization.
Anonymous No.64140949
>>64134745
No but don't you see, he's a qualified engineer because he used ChatGPT and rp'd to try and defend himself and continue to quadruple down on being more braindead than a sloth
>Cannot use a hammer for it's intended purpose
This thread has been up for over a day and OP STILL cannot figure out the function of a rubber mallet. Everything he says about everyone else being educated on common core is projection to a mythical degree.
Anonymous No.64141877 >>64142367
>>64140941
>>64139469
Anonymous No.64142367 >>64142403
>>64141877
cope more
Anonymous No.64142401 >>64142771
>the chinks just make the part smaller than the min tolerance
>this guarantees a gap between the plate and slide putting more stress on the fasters leading to loss of zero
>retard OP thinks this is a good thing
Vely implessive
Anonymous No.64142403 >>64142432
>>64142367
Nigger what am I coping for? lmao
You're the one who can't understand directions, you're the one who can't into basic fucking hand tools, you're the one who can't into contacting customer service if it was a QC issue.
You're a stupid faggot.
Anonymous No.64142409
>>64133652 (OP)
>Gen 5
Should've bought an RXM retard, everyone knows g5 has the worst optics mount ever
Anonymous No.64142432 >>64142514
>>64142403
Is the OP in the room with you know? Tell me more about it.
Anonymous No.64142448
Op is the type of idiot that leaves a shitty Amazon review because he couldn't find the on button.
Anonymous No.64142514
>>64142432
>with you know
Holy fucking kek. He's not in the room with me, but clearly still posting in the thread.
Why don't you go GPT some shit and pretend to be an engineer again? Give me something else to chuckle at.
Anonymous No.64142693
perfect pic for OP
Anonymous No.64142737
>>64133950
>Made in America
Proof?
Anonymous No.64142767
What people don't realize about American manufacturing is that we cut at least as many corners if not more than the Chinese.
Dollar for dollar, Chinese is infinitely better quality than American made. American made all you're doing is paying more on more expensive labor.
>t. former manufacturing dude
Anonymous No.64142771
>>64142401
If that's the case then QD mounts are equally worthless
Anonymous No.64142778
>>64134389
>ChatGPT
I mean this with the utmost respect and reverence, kill yourself
Anonymous No.64142791 >>64142858 >>64144887
>>64134373
Literally all it is is your supervisor to check a part with a micrometer every 50 parts instead of 10.
American manufacturing is a fucking embarrassment
Anonymous No.64142792
>>64133652 (OP)
This is what you get for trying to put an optic on a pistol anyway. Doing that is gay.
Anonymous No.64142858 >>64142909 >>64144887
>>64142791
>all it is is your supervisor to check
Anonymous No.64142909 >>64142942 >>64143188 >>64144887
>>64142858
If only your production was as good as your command of your mother tongue.
kek
Anonymous No.64142942
>>64142909
>nonsensical ESL gibberish
>no you don't understand because you're dumb!
Anonymous No.64143076 >>64143142 >>64143468
>>64133652 (OP)
Tolerance stacking, I'd imagine. Odds are your Glock is on the tighter side and you got a plate that was made on the larger-end of the tolerance range. Just RMA it and get a replacement; it happens with literally any inexpensive machined product because having a dude go through and manually gauge everything is far more expensive than just dealing with periodic lemons. Even if it takes a second try, it'll be better than the shitty MOS plates that Glock ships the guns with.
Anonymous No.64143142
>>64143076
The OP should phone them and ask if he is supposed to hammer it into place (kek) or file it.
Anonymous No.64143165 >>64143273
scrolling through ITT I can tell who grew up post y2k without a male father figure
Anonymous No.64143188 >>64143222
>>64142909
>if only yours production was filled with ramen noodles in the same way as glorious CCP of Chigna production
Shey hu ma cumrad
Anonymous No.64143222
>>64143188
The Chinese live rent free in your head (as well as the OP I may add kek)
I am pretty sure that they wouldn't waste a yuan for "shilling" on some basket weaving forum. It's bad for (serious) business.
Anonymous No.64143262 >>64143468 >>64143559 >>64144377
Are you gay and retarded by chance? My last post ITT was >>64134262 and I never pretended to be an engineer. In what state of assblast are you in rn?
Anonymous No.64143273
>>64143165
Enlighten me. Are these the guys who demand to be treated seriously by commercial firms or the ones who suck it up.
Anonymous No.64143280 >>64143348
>>64133652 (OP)
zigger vassalland cant into guns pls understand
Anonymous No.64143348
>>64143280
such is life under the orange retard
Anonymous No.64143468 >>64143531 >>64143542
>>64143262
It's been two days. Why can't you figure out how a hammer works yet?
If you're that much of a spoiled child that you need your ultra super duper extremely precise plate that just slides in! (ignoring how your glock slide will probably have tolerances outside of that spec anyways), go do what >>64143076 says and RMA it.
Anonymous No.64143531 >>64143542 >>64143633
>>64143468
kek, I will never understand this third-world mindset. You pay a lot of money for a shit product, it’s defective, it’s garbage—yet you convince yourself it’s your job to make it work, because you’re a “real man,” not a cuck, right?

So you throw it on your gun, fully aware it’s defective trash. You even hammer it on there like some orc, slapping together scrap metal in the hope that the feeling of being taken advantage of will somehow fade away.

But deep down, you know you’re a cuck. You paid someone money and got garbage in return. Then, instead of calling it out, you smeared that garbage on your own face to wear it forever. Even worse, you don’t side with those calling out the seller, no, no, you defend your actions and the seller, insisting that proudly smearing shit on your face is somehow valid. Meanwhile, any normal person would have simply returned it.

You have to be buck broken on an existential level to let someone do you like that.
Maybe that’s why jews have such a strong foothold in America, people are practically begging for it with that mindset.

I ordered a Chinesium plate myself. I’ll let you guys know how that one works out.

One word of advice, from dad to son: never take it up the ass like that. It isn’t tough, it isn’t manly, it isn’t self-reliant—it’s peak cuck behavior.
Anonymous No.64143542
>>64143531
>>64143468

lmao, I told GPT to summarize the thread and answer you and this came out lol
Anonymous No.64143559 >>64143673
>>64143262
>cant file a fucking plate
>calling others gay retards
look in the mirror you retarded nigger.
Anonymous No.64143611 >>64143675
>>64133668
dey racisss

re... i mean Horosun make a gud paht, how dare ah raciss comprany make only for american optic, very racisss indeed

prease support china optic company prease dear

love you customah, goodnight
Anonymous No.64143633
>>64143531
I'm not reading all that.
Anonymous No.64143673
>>64143559
>posting the uber boomer meme

I now know why hold these dumbass views.

>Boy, in ma day we just manned up and took care of that negro child the single mother we were dating had while we were deployed. Like real men do! We also fixed the defective optic plates we were overcharged on, because real men are being takin advantage of and take it in the ass some more. Also Jesus said something about the other asscheek, so you better grow up, Boy!

You are long overdue for retirement, Boomer. Shit like this is why the P320 exists. Just fix it yourself.
Anonymous No.64143675
>>64143611
holy fuck is that the goofy looking holosun rep?
Anonymous No.64144377
>>64143262
>g-g-guys, those obvious ChatGPT posts claiming Glock uses sub-micron tolerances were totally not me!
Anonymous No.64144499 >>64145443
>>64133652 (OP)
>>64133677
you sound like my dad

cars, fishing tackle, and guns are practically the same thing. sometimes the parts dont quite fit right or are defective from factory. either fix your shit yourself, or whine like a little bitch your choice
Anonymous No.64144887
>>64142791
>>64142858
>>64142909
I fucked up because I was typing really fast coming out of lunch break. What I meant to say, is that your supervisor will simply have you measure parts for tolerances less frequently than maybe you would producing something more demanding
Anonymous No.64144905
>>64133652 (OP)
>Glock
Found your problem.
Anonymous No.64145443
>>64144499
The basic function of this trinket is to fit right in.
Anonymous No.64145450 >>64145670
>>64133652 (OP)
No issues installing mine.
Anonymous No.64145670 >>64145793 >>64146674
>>64145450
I'll never understand putting $1000 worth of electronics on a ghetto blaster
Anonymous No.64145686
>>64134073
Tango Down only manufactures the ACRO plate for FCD, the other mounting plates for different optics are made in house by FCD or a different subcontractor (likely). That probably explains why the TD manufactured mount fits correctly.

I've got two ACRO plates and both are perfectly in spec and drop in with zero movement.
Anonymous No.64145793 >>64146674
>>64145670
How about adding a ghetto blaster and an overpriced weapon light to your $600 RMR?
Anonymous No.64145846
>>64133755
Cannot speak for FCD's other stuff, but I have a titanium forward assist, and their ar safety, both are sexo.
Anonymous No.64146674
>>64145670
>>64145793
Poor fags detected.
Anonymous No.64148024 >>64150018
so whats gonna happen when this guy buys ammo for the first time, goes to the shooting range, for the first time, and discovers not all of it works in his glock without some tweaking?
Anonymous No.64150018 >>64152977
>>64148024
According to some retard in this thread instead of just contacting Glock and getting the gun fixed/replaced he should just get a rubber mallet and plonk on it.
Anonymous No.64150660
It's so incredibly obvious no one in here has worked on cars
Anonymous No.64150676 >>64150737
>>64133821
>yeah I'll spend a long time crying and moaning on 4chan but no I'll never ever contact the company to have them send me a new one
OP is a woman or trans.
Anonymous No.64150695
Forward controls is gay and op is an illiterate retard who doesn't own a hammer and is too scared to call the company. This is one of the most embarrassing threads I'vex seen in the last decade. Op you should sell all your guns because you clearly shouldn't own any
Anonymous No.64150737
>>64150676
>claim to be straight
>get fucked in the ass
>go back for more
>claim getting sodomized is super straight
Anonymous No.64150740
>>64133652 (OP)
>needing an optics plate
>not owning a shadow systems
>2025
Iol
Anonymous No.64152977
>>64150018
Of course you'd say something as retarded as this.