3 results for "839ff78d51bb140fac46cb9298aad389"
Pic related, PSA AK failure. I would call this a deadly catastrophic failure because it results in failures to ignite primer and fire, and in order to remedy the failure you have to disassemble the bolt.

>>64461447
One might say I'm a "try-hard" (pick me)

>>64461460
>beater guns
>guns
They're not guns at all. Guns need to be considered in a binary manner in their status as firearms. They're either guns, or they're toy facsimiles, and PSA makes toy facsimiles.

>>64461480
Novus version, PDS-1
Honestly a very solid optic for the money, especially if you like the aesthetic. Good NIR light transmission for passive NVG use. Good brightness, good reticle sharpness. Shake awake, battery, build quality etc etc.
>>64338608
Shitty bait and very tranny of you to just completely ignore all of the arguments and wall posts from the past week and offer up
>Not a real gun
>Shoots bullet

>>64338617
>never had as many issues
You can't actually assert this quantitatively because the statistics on the matter are unclear, but we know that BOTH PSA and WBP have had far more issues than the vast majority of other AKs out there, and have been around for FAR less time, both of them.
>What broke
Typical issue that MANY have had with PSA 5.56 guns which is something works its way or wears its way out of spec (could be wear inside firing pin channel inside bolt, could be firing pin wear itself, hell could be headspace working out of spec), but gun started punching primers and bits of primer blow into the firing pin channel then the firing pin can't protrude correctly so you get light primer strikes and no ignition, until you disassemble bolt and remove bits of primer, only to have it happen again within 5-10 rounds of putting the gun back together. IE a piece of shit that would get you killed if you were actually using the gun to liberate some demonic tranny story time hour show.
PSA AK102 gave up the ghost around 1200 rounds or so. Not sure exactly what is wrong, for all I know the headspace walked on me, but it light primer strikes like 50% of the time now. Based on some reddit posts I think that it is punching primers and bits of primer are getting stuck in the firing pin channel preventing good protrusion then resulting in light primer strikes? PSA issued a shipping label, but want the entire gun back. They're saying they've moved to a new bolt and firing pin design, and that my 102 is an earlier gun (serial number 0700) so that they need to entire gun to headspace a new bolt to it...

>>64121517
Your biggest concern should be that it never stops sparking like a bitch and you end up stuck with a $1000 suppressor that is tactically unsound.

>>64119361
Lol capitalism

>>64118377
Not a bad snag.